Whirlpool & Maytag · Washer
F8 E1
Water fill error
What causes it
Water inlet valve issue or low household water pressure.
What it means in practice
The washer waited for water and didn't get enough, so it stopped. It is usually a supply issue, but a weak inlet valve inside can do it too.
What to check before calling
- ✓Confirm both water valves are fully open.
- ✓Check supply hoses for kinks or a clogged inlet screen.
- ✓Check that both water taps are fully open and the hoses aren't kinked.
- ✓Clean the inlet screens where the hoses connect to the washer.
When to call a technician
If water supply is fine and the code returns, the water inlet valve is the likely cause.
If those checks don't clear the F8 E1 code, it's usually a sign of a failed part rather than something to keep resetting. A technician runs a full diagnostic on your washer, confirms the cause, and quotes the repair before any work starts. The $89 service call is waived if you go ahead with the repair, and parts and labor are covered by our 90-day warranty on parts & labor.
Common question
Does hard water cause F8 E1?
It can. Scale clogs the inlet screens and valve, which slows the fill. Cleaning the screens helps, and a stuck valve needs replacing.
Still showing F8 E1?
Same-day diagnosis and repair across Las Vegas, Henderson, and Summerlin. $89 service call, waived with repair.
Other Washer Error Codes
Not seeing F8 E1, or want to compare it against a different code on the display? Here's what these other common washer codes mean.